New Energy Storage & Telecom PON Access

Products Details

HomePage> 产品中心

5G AC WiFi GPON ONT 4 Antenna TB54A

5G AC WiFi GPON ONT 4 Antenna TB54A

TB54A Support MU-MIMO and OFDMA technologies have greatly improved the efficiency of Wi Fi networks. 

Excellent WiFi performance


Hardware Specification


Chipset

BROADCOM CPU  + 5G BCM4352KMLG+ 2.4G BCM43217TKMLG

DDR RAM

4GB

FLASH

2GB

Fiber interface

1 SC / UPC Fibre ports

Ethernet interface

4* 10 / 100 / 1000M Adaptive port

Telephone port

1  telephone port

wireless WIFI

4  external antennas 5dBi Maximum Speed  867mb/s for 5g  300mb/s for 2.4g

Suport 2.4GHz wireless network

Support 5GHz Wireless network

Compliance with the IEEE 802.11a/g/n/ac

USB port

2 U S B  ports

 

Product features:

1. Support for  Most of poplular OLT including ZTE Huawei Fiberhome Nokia OLT etc.

2. accord with H.248, MGCP, and the SIP protocol standards

3. Compliance with the 802.11 n / b / g / ac protocol standards

4. Support the Ethernet business second floor exchange and up and down business line speed forwarding

5. Support for frame filtering and suppression

6. Support standard 802.1Q Vlan functionality and support VLAN conversion

7. Support for 4,094 VLAN's

8. Support for the dynamic bandwidth allocation function

9. Support for PPPOE, IPOE, and Bridge services

10. Support for QoS, including business flow classification, priority marking, queuing and scheduling, flow shaping, and traffic control

11. Support for IGMP Proxy and IGMP Snooping

12. Support Ethernet port speed limit, loop detection, second floor isolation

13. Support power failure alarm

14. Support for the remote reset and restart function

15. Support the recovery of the factory parameters function

16. Support data encryption

17. Support the status detection and fault reporting function

18. Support power protection

 

Port features:

19. PON: connected to the source OLT device via optical fiber cable

20. Ethernet port: connected to the user side equipment through twisted pair network wire, LAN1-LAN4 port rate is 10 / 100 / 1000M adaptive, Telephone port: connect to the user-side equipment through the telephone line

21. Reset button: restart the device; hold down for more than 3 seconds, the system will restore the factory default

22. WIFI button: no line is turned on / off by the function

23. WPS button: WPS is used to simplify security and network management for Wi-Fi wireless, Wi-Fi protection settings, you can depending on the client Support, choose the appropriate mode

24. LED button: The LED indicator light is on / off

25. Power switch: power supply on / off

26. Power interface: connect with external power supply

 

Optical characteristics:

27. 1. Support wave division multiplexing technology single fiber bidirectional (single fiber three-way) transmission

28. Interface type: SC / UPC

29. Maximum spectroscopic ratio: 1:128

30. Rate: 1.25Gbps, 2.5Gbps

31. Send wavelength: 1310 nm

32. Receive wavelength: 1,490 n m

33. Output optical power: -1~ + 4dBm

34. Receive sensitivity: <-27dBm

35. The longest distance between OLT and ONU supports 20 km

 

Physical characteristics:

36. Power supply: 12V / 1A

37. Operating temperature: -10~60℃

38. Storage temperature: -20~80℃

39. Case Specification: 250 * 170 * 35 MM

40. Weight : 320g

  

ApplicationFTTH  INTERNETIPTVWi-Fi