5G AC WiFi XPON ONT TB58B

Model: TB58B

Specification: XPON ONT 1GE 3FE 1POTS 2USB + 2.4G/5G Wi-Fi

Apply For : HUAWEI ZTE Fiberhome VSOL GPON EPON OLT

Hardware Specification:

Chipset	ZX279128 + 5G MT7612EN + 2.4G MT7603EN
DDR RAM	4GB
FLASH ROM	2GB
Fiber interface	1 SC / UPC Fibre ports
Ethernet interface	1* 10 / 100 / 1000M Adaptive port 3* 10 / 100M Adaptive ports
Telephone port	1 telephone port
wireless WIFI	2 external antennas 5dBi Suport 2.4GHz wireless network Support 5GHz Wireless network Compliance with the IEEE 802.11a/g/n/ac
USB port	2 U S B ports

Product features:

1. Support for EPON / GPON dual-mode

2. Support ZTE OLT OMCI and Most of poplular OLT including Huawei Fiberhome Nokia OLT etc.

3. accord with H.248, MGCP, and the SIP protocol standards

4. Compliance with the 802.11 n / b / g / ac protocol standards

5. Support the Ethernet business second floor exchange and up and down business line speed forwarding

6. Support for frame filtering and suppression

7. Support standard 802.1Q Vlan functionality and support VLAN conversion

8. Support for 4,094 VLAN's

9. Support for the dynamic bandwidth allocation function

10. Support for PPPOE, IPOE, and Bridge services

11. Support for QoS, including business flow classification, priority marking, queuing and scheduling, flow shaping, and traffic control

12. Support for IGMP Proxy and IGMP Snooping

13. Support Ethernet port speed limit, loop detection, second floor isolation

14. Support power failure alarm

15. Support for the remote reset and restart function

16. Support the recovery of the factory parameters function

17. Support data encryption

18. Support the status detection and fault reporting function

19. Support power protection

Port features:

20. PON: connected to the source OLT device via optical fiber cable

21. Ethernet port: connected to the user side equipment through twisted pair network wire, LAN1 port rate is 10 / 100 / 1000M adaptive, LAN2-LAN4 Port rate is 10 / 100M adaptive

22. Telephone port: connect to the user-side equipment through the telephone line

23. Reset button: restart the device; hold down for more than 3 seconds, the system will restore the factory default

24. WIFI button: no line is turned on / off by the function

25. WPS button: WPS is used to simplify security and network management for Wi-Fi wireless, Wi-Fi protection settings, you can depending on the client Support, choose the appropriate mode

26. LED button: The LED indicator light is on / off

27. Power switch: power supply on / off

28. Power interface: connect with external power supply

Optical characteristics:

29. 1. Support wave division multiplexing technology single fiber bidirectional (single fiber three-way) transmission

30. Interface type: SC / UPC APC optional

31. Maximum spectroscopic ratio: 1:128

32. Rate: 1.25Gbps, 2.5Gbps

33. Send wavelength: 1310 nm

34. Receive wavelength: 1,490 n m

35. Output optical power: -1~ + 4dBm

36. Receive sensitivity: <-27dBm