XPON ONT 1GE Bridge TB100
1. Overview
TB100 is designed as HGU (Home Gateway Unit)/SFU(Single family Unit) in deferent FTTH solutions,The carrier-class FTTH application provides data service access.
TB100 is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT
TB100 adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0 and GPON Standard of ITU-TG.984.X
TB100 is designed by Realtek chipset 9601D
2. Functional Feature
Support EPON/GPON mode and switch mode automatically
Support ONU auto-discovery/Link detection/remote upgrade of software
Support Route PPPoE/DHCP/Static IP and Bridge mode
Support IPv4/IPv6
Support Firewall function and IGMP multicast feature
Support LAN IP and DHCP Server configuration
Support Port Forwarding and Loop-Detect
Support OMCI / TR069 Remote Configuration and maintenance
Specialized design for system breakdown prevention to maintain stable system
3. Hardware Specification
Technical item | Details |
PON Interface | 1 GPON/EPON port(EPON PX20+ and GPON Class B+) |
Receiving sensitivity: ≤-28dBm | |
Transmitting optical power: 0~+4dBm | |
Transmission distance: 20KM | |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/UPC Connector |
LAN Interface | 1* 10/100/1000M RJ45 |
LED | 4 LED, For Status of PWR、LOS、PON、LINK |
Push-Button | 2,For Function of Poweron/off,Reset |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%～90%（non-condensing） | |
Storing Condition | Temperature: -30℃~+60℃ |
Humidity: 10%~90%（non-condensing） | |
Power Supply | Though USB port power |
Power Consumption | <3W |
Dimension | 86mmx86mmx30mm(L×W×H) |
Net Weight | 0.3Kg |
4. Panel lights Introduction
Pilot | Status | Description |
PWR | On | The device is powered up. |
Off | The device is powered down. | |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. | |
Off | The device registration is incorrect. | |
LOS | Blink | The device doses not receive optical signals. |
Off | The device has received optical signal. | |
LINK | On | Port is connected properly (LINK),ready to work |
Off | Port connection exception or not connected. |
5. Application
Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
