2.4G XPON ONT TB24A
Model: TB24A 2.4G XPON ONT
Specification:XPON ONT 1GE 3FE 1POTS 1USB 2.4Ghz Wi-Fi
Apply for : HUAWEI ZTE Fiberhome VSOL GPON EPON OLT
Fucntion: FTTH,Internet,IPTV,WiFi
Hardware : 2Gb RAM + 2Gb ROM + 5dBi WiFi Antenna
1. Support for EPON / GPON dual-mode
2. Support ZTE OLT OMCI and Most of poplular OLT including Huawei Fiberhome Nokia OLT etc.
3. accord with H.248, MGCP, and the SIP protocol standards
4. Compliance with the 802.11 n / b / g protocol standards
5. Support the Ethernet business second floor exchange and up and down business line speed forwarding
6. Support for frame filtering and suppression
7. Support standard 802.1Q Vlan functionality and support VLAN conversion
8. Support for 4,094 VLAN's
9. Support for the dynamic bandwidth allocation function
10. Support for PPPOE, IPOE, and Bridge services
11. Support for QoS, including business flow classification, priority marking, queuing and scheduling, flow shaping, and traffic control
12. Supports 2.6.3 IGM Snooping
13. Support Ethernet port speed limit, loop detection, second floor isolation
14. Support power failure alarm
15. Support for the remote reset and restart function
16. Support the recovery of the factory parameters function
17. Support data encryption
18. Support the status detection and fault reporting function
19. Support power protection
Port features:
20. PON: connected to the source OLT device via optical fiber cable
21. Ethernet port: connected to the user side equipment through twisted pair network wire, LAN1 port rate is 10 / 100 / 1000M adaptive, LAN2-LAN4 Port rate is 10 / 100M adaptive
22. Telephone port: connect to the user-side equipment through the telephone line
23. Reset button: restart the device; hold down for more than 3 seconds, the system will restore the factory default
24. WIFI button: no line is turned on / off by the function
25. WPS button: WPS is used to simplify security settings and network management for Wi-Fi wireless, namely Wi-Fi protection settings, which you can use depending on the client Support, choose the appropriate mode
26. LED button: the LED indicator light is on / off
27. Power switch: power supply on / off
28. Power interface: connect with external power supply
Optical characteristics:
29. Support wave split multiplexing technology single fiber two-wave bidirectional transmission
30. Interface type: SC / UPC
31. Maximum spectroscopic ratio: 1:128
32. Rate: 1.25Gbps, 2.5Gbps
33. Send wavelength: 1310 nm
34. Receive wavelength: 1,490 n m
35. Output optical power: -1~ + 4dBm
36. Receive sensitivity: <-27dBm
37. The maximum distance distance between OLT and ONU support is 20 km
Physical characteristics:
38. Power supply: 12V / 1A
39. Operating temperature: -10~60℃
40. Storage temperature: -20°~80°
41. Case Specification: 156 * 116 * 35MM
42. Weight : 250g